Revit Modelling Services
Revit modelling across architectural, structural and MEP disciplines, built to the Level of Development your project stage actually requires.
Revit modelling capacity is a common bottleneck on design and documentation timelines — whether that's building a model from scratch, updating one through design changes, or picking up modelling overflow during a busy documentation period. Because Revit models sit at the centre of a coordinated project, a modelling bottleneck in one discipline tends to stall progress for everyone else waiting on that model to be current, turning a single team's capacity problem into a whole-project scheduling problem.
What This Service Covers
We build and maintain Revit models across architectural, structural and MEP disciplines, working to your project's title block, naming conventions and BIM execution plan where one exists, rather than imposing our own conventions on a project that already has an established standard.
This covers new model creation, updating existing models through design revisions, and producing model-derived drawing sheets and schedules as part of a coordinated documentation set.
Following an Established BIM Execution Plan
Where a project has a BIM execution plan, we treat it as the governing document for modelling decisions — naming, parameters, worksets and LOD targets are all followed as specified, since deviating from an agreed BEP creates exactly the kind of coordination friction BIM is meant to eliminate.
Model updates through ongoing design changes are handled with attention to what else in the federated model depends on the change — a wall move that affects a room schedule, or a level change that affects every floor plan referencing it, is tracked through rather than treated as an isolated edit.
Setting Up a Workflow for the First Time
For teams without an established Revit workflow yet, we can help set up a sensible template and family library as part of the first project, so subsequent projects start from a stronger foundation rather than repeating the same set-up decisions each time.
Worksharing and model division on larger projects is planned deliberately rather than left to grow organically — deciding upfront how a model splits across worksets or linked files, based on how the team actually collaborates, avoids the file-size and performance problems that an unplanned, ad hoc division tends to create as a project grows.
Schedules and Tags as First-Class Outputs
Schedules and tags are treated as first-class modelling outputs, not incidental byproducts — a schedule that's wired to pull the wrong parameter, or a tag that displays inconsistent information across similar elements, undermines confidence in the model's data even when the geometry itself is completely correct.
What You Get
- Architectural Revit models
- Structural Revit models
- MEP Revit models
- Custom Revit families
- Model-derived drawing sheets
- Model updates through design revisions
- Revit templates and family libraries for teams starting a BIM workflow
Where This Is Used
- New building design documentation
- Structural and MEP coordination
- Design development and construction documentation
- Renovation and retrofit modelling
- Facilities and asset model handover
How It Works
- 01
Model brief
Discipline, LOD and any BIM execution plan or template confirmed upfront, along with how the model will be used downstream.
- 02
Scope & quote
Deliverables and turnaround agreed before modelling starts, based on the actual size and complexity of the project.
- 03
Modelling
Model built or updated to the agreed standard and LOD, with knock-on impacts of each change tracked through the federated model.
- 04
Review
Model checked against reference documentation and coordination requirements before issue.
- 05
Delivery
Model and any derived sheets delivered, with revisions tracked against the previous issue.
Software We Use
Industries We Support
Related Projects
Multi-Discipline BIM Clash Detection
Illustrative example: federated model coordination and clash detection across architectural, structural and MEP models.
View projectPoint Cloud to BIM — Existing Building
Illustrative example: converting laser scan data of an existing building into a working Revit model for a renovation project.
View projectFrequently Asked Questions
- Yes, we model to your supplied BEP, template and naming conventions where these exist, treating them as the governing standard rather than substituting our own approach.
- Yes, working within an existing model through ongoing design changes is a common part of this service, including tracking how a change in one area affects schedules and views elsewhere in the model.
- All three — architectural, structural and MEP Revit modelling are covered, either individually or as a coordinated set.
- Yes, setting up a sensible template, family library and naming convention as part of your first Revit project is something we can help with, so later projects aren't repeating the same foundational decisions.
- We plan worksets and linked-file structure deliberately, based on how your team actually collaborates, rather than letting the model's structure grow organically and run into file-size or performance problems later.
- Yes, schedules and tags are checked as part of our review process, since a schedule wired to the wrong parameter undermines confidence in the model even when the underlying geometry is correct.
- Yes, MEP-focused modelling for a fit-out or tenancy project is a common, more contained scope compared to a full base-building model, and is scoped accordingly.
- Yes, a model health check — reviewing family quality, workset structure and parameter consistency — before handover to your in-house team is a common request at the end of an engagement.
- Yes, where quantity take-off is a project requirement, we structure model parameters and schedules with that use in mind from the start, rather than treating it as an afterthought once documentation is complete.
- We adjust modelling conventions to match the updated BEP as cleanly as possible, and flag any rework this creates in previously modelled areas so the impact is visible rather than absorbed silently.
- Yes, where a project needs temporary works — shoring, propping, temporary access — represented in the model for coordination purposes, this can be scoped alongside the permanent structure modelling.
- Yes, we model to whatever specialised requirements a building type carries — infection control clearances in healthcare, or specific kitchen and back-of-house layouts in hospitality — following your project's specific brief and any relevant guidelines.
- Yes, a single well-structured model can serve both purposes, avoiding the need to maintain a separate visualisation model that risks drifting from the actual design documentation.
- Yes, Revit's phasing tools can be used to represent existing, demolished and new work across a staged development, which is particularly useful for renovation and multi-stage projects.
- Yes, room data sheets summarising finishes, fixtures and specific requirements per room can be generated from model data where the project requires this level of documentation.
- Basic site and context modelling — for coordination, shadow studies or presentation purposes — can be included where relevant, though detailed civil or landscape modelling would typically sit with the relevant specialist consultant.
- Yes, dividing a model logically to align with how a project's construction packages are being tendered is a common request on larger, staged projects.
- Yes, precast panels and elements can be modelled with the parameters a precaster typically needs — panel type, connection detail, lifting points — where the project calls for this level of coordination.
- Yes, establishing a shared parameter file so every consultant's model reports data consistently is a valuable early step on multi-consultant projects, and one we can help set up if it isn't already in place.
- Yes, setting up view templates that enforce consistent graphics across sheets is part of good Revit modelling practice, and saves considerable manual formatting effort compared to adjusting each view individually.
- Yes, we can prepare export-ready geometry from the Revit model suitable for 3D printing a physical presentation model, coordinating with whichever 3D printing service or bureau is being used.
- Where a project needs specific data captured to support an energy or sustainability rating tool, we can model with those data requirements in mind, in consultation with the relevant sustainability consultant.
- Yes, an ongoing retainer-style arrangement for smaller, recurring model updates is a common way this service is used by practices that need steady Revit support without a full-time in-house modeller.
- Yes, joinery and fixed furniture can be modelled in Revit alongside the base building, either as generic representations or as detailed families depending on the level of coordination the project needs.
- Yes, upgrading a model from an older Revit version, and checking that families and views translate cleanly into the newer version, is a common and straightforward request.
- Where useful, we can walk your team through a delivered model's structure and conventions, so anyone taking it over in-house understands how it was built and why.
- Yes, modelling depth scales to the project — a straightforward industrial shed doesn't need the same LOD as a complex multi-consultant commercial tower, and we scope accordingly rather than over-modelling by default.
Get a Quote for Revit Modelling
Tell us what you need and our team can review the project requirements.